mlaunch#

This tool lets you quickly spin up and monitor MongoDB environments on your local machine. It supports various configurations of stand-alone servers, replica sets and sharded clusters. Individual nodes or groups of nodes can easily be stopped and started again.

In addition to all the listed parameters of mlaunch below, you can pass in any arbitrary options that a mongos or mongod binary would understand, and mlaunch will pass them on to the correct binary. This includes the -f option to read further options from a MongoDB configuration file.

Usage#

mlaunch [-h] [--version] [--no-progressbar]
        {init,start,stop,restart,list,kill} ...

General Parameters#

The following parameters work with all commands.

Help#

-h, --help

shows the help text and exits.

Version#

--version

shows the version number and exits.

Verbosity#

--verbose

This will print additional information, depending on each of the commands.

Data directory#

--dir DIR

This parameter changes the directory where mlaunch stores its data and log files. By default, the directory is the local directory ./data, below the current working directory.

Commands#

mlaunch uses different commands to initialize, stop, start and list test environments. The general syntax is:

mlaunch <command> [--parameters ...]

where <command> is one of the following choices:

  • init: creates an initial environment and starts all nodes

  • stop: stops some or all nodes in the current environment

  • start: starts some or all nodes in the current environment

  • list: shows a list of the current environment

  • kill: sends a kill (or other) signal to the nodes in the current environment

For a given environment (specified by its data directory with the --dir argument, the default is ./data), the init command only needs to be called once. mlaunch stores the configuration in a config file within the data directory, called .mlaunch_startup. With this file, mlaunch remembers the configuration and can start and stop nodes when required.


init#

This command initializes and starts MongoDB stand-alone instances, replica sets, or sharded clusters. It only needs to be called once for each environment (specified by its data directory with the --dir argument, the default is ./data).

Usage#

mlaunch init [-h] (--single | --replicaset) [--nodes NUM] [--arbiter]
             [--name NAME] [--priority] [--sharded N [N ...]]
             [--config NUM] [--csrs] [--mongos NUM] [--verbose]
             [--port PORT] [--binarypath PATH] [--dir DIR]
             [--hostname HOSTNAME] [--auth] [--username USERNAME]
             [--password PASSWORD] [--auth-db DB]
             [--auth-roles [ROLE [ROLE ...]]] [--auth-role-docs]
             [--no-initial-user] [--sslCAFile SSLCAFILE]
             [--sslCRLFile SSLCRLFILE] [--sslAllowInvalidHostnames]
             [--sslAllowInvalidCertificates]
             [--sslMode {disabled,allowSSL,preferSSL,requireSSL}]
             [--sslPEMKeyFile SSLPEMKEYFILE]
             [--sslPEMKeyPassword SSLPEMKEYPASSWORD]
             [--sslClusterFile SSLCLUSTERFILE]
             [--sslClusterPassword SSLCLUSTERPASSWORD]
             [--sslDisabledProtocols SSLDISABLEDPROTOCOLS]
             [--sslAllowConnectionsWithoutCertificates] [--sslFIPSMode]
             [--sslClientCertificate SSLCLIENTCERTIFICATE]
             [--sslClientPEMKeyFile SSLCLIENTPEMKEYFILE]
             [--sslClientPEMKeyPassword SSLCLIENTPEMKEYPASSWORD]

For convenience and backwards compatibility, the init command is the default command and can be omitted.

Required Parameters#

The init command requires exactly one of the following two parameters to run: --single or --replicaset. They are mutually exclusive and one must be specified for each mlaunch init execution.

--single

This parameter will create a single stand-alone node. If --sharded is also specified, this parameter will create each shard as a single stand-alone node.

For example, to start a single mongod instance on port 27017:

mlaunch --single
--replicaset

This parameter will create a replica set rather than a single node. Other Replica Set Parameters apply and can modify the properties of the replica set to launch. If --sharded is also specified, this parameter will create one such replica sets for each shard.

For example, to start a replica set with (by default) 3 nodes on ports 27017, 27018, 27019:

mlaunch --replicaset

Replica Set Parameters#

The following parameters change how a replica set is set up. These parameters require that you picked the --replicaset option from the required parameters.

--nodes N

Specifies the number of data-bearing nodes (arbiters not included) for this replica set. The default value is 3.

For example:

mlaunch --replicaset --nodes 5

This command starts 5 mongod instances and configures them to one replica set.

--arbiter

If this parameter is present, an additional arbiter is added to the replica set. Currently, mlaunch only supports adding one arbiter. Additional arbiters can be started and added to the replica set manually.

For example:

mlaunch --replicaset --nodes 2 --arbiter

This command starts 2 data-bearing mongod instances and adds one arbiter to the replica set, for a total of 3 voting nodes.

--name NAME

This option lets you modify the name of the replica set. This will change both the name and the sub-directory of the dbpath. This option is only allowed for a single replica sets and will not work in sharded setups, where replica set names are equivalent to the shard names. The default name is replset.

For example:

mlaunch --replicaset --name "my_rs_1"

This command will create a replica set with the name my_rs_1 and will also store the dbpath and log files under ./data/my_rs_1.

Sharding Parameters#

The following parameters influence the setup of a sharded environment. Each shard will be a copy of the previously specified setup, be it a single instance or a replica set.

--sharded S [S ...]

If this parameter is provided, sharding is enabled and mlaunch will create the specified number of shards and add the shards together to a sharded cluster. The parameter can work in two ways: Either by specifying a single number, which is the number of shards, or by specifying a list of shard names.

For example:

mlaunch --single --sharded 3

This command will create an environment of 3 shards, each consisting of a single stand-alone node. The shard names are shard0001, shard0002, shard0003. It will also create 1 config server and 1 mongos per default.

For example:

mlaunch --replicaset --sharded tic tac toe

This command will create 3 shards, named tic, tac and toe. Each shard will consist of a replica set of (per default) 3 nodes. It will also create 1 config server and 1 mongos per default.

--config N

This parameter determines, how many config servers are launched in a sharded environment. The default number is 1. The only valid options for N are 1 or 3.

--csrs

This parameter has mlaunch use Config Servers as a Replica Set (CSRS) rather than the older Sync Cluster Connection Config (SCCC).

The CSRS deployment option is supported by MongoDB 3.2+, and as of MongoDB 3.4 is the default (and only) supported option.

If you are using MongoDB 3.4 and greater, mlaunch will use CSRS by default.

Changed in version 1.2.3

CSRS config servers will no longer include incompatible settings, such as:

  • --storageEngine – CSRS config servers will always use WiredTiger.

  • --arbiter – CSRS config servers cannot have any arbiter.

--mongos N

This parameter determines, how many mongos instances are launched in a sharded environment. The default number is 1. With this setting, the default can be changed to N mongos instances.

Authentication Parameters#

--auth

This parameter enables authentication on your setup. It will transparently work with single instances (that require --auth) as well as replica sets and sharded environments (that require --keyFile). There is no need to additionally specify a keyfile, a random keyfile will be generated for you.

A username and password will also be set up, either on the mongos for sharded environments, or on the primary node for replica sets or on a single node.

--username

This parameter changes the default username user to the specified user.

--password

This parameter changes the default password password to the specified password.

Note

The default password is chosen deliberately to be easy to remember or guess. mlaunch is meant for testing and issue reproduction, not for production use. Even a strong password will not guarantee security with mlaunch-generated environments, because the username and password are included in the data/.mlaunch_startup file in clear text.

--auth-db

This parameter changes the default database, from admin, in which the user will be created.

Note

If you change the database, it may not be possible for mlaunch to execute certain commands due to missing privileges. This may lead to unexpected behavior for some mlaunch operations, like for example mlaunch stop, which uses the internal shutdown command. If this is the case, use mlaunch kill instead.

--auth-roles

This parameter changes the initial default roles that the user will receive. The default roles are dbAdminAnyDatabase, readWriteAnyDatabase, userAdminAnyDatabase and clusterAdmin. You can provide different roles with this parameter, separated by spaces.

Note

If you change the default roles, it may not be possible for mlaunch to execute certain commands due to missing privileges. This may lead to unexpected behavior for some mlaunch operations, like for example mlaunch stop, which uses the internal shutdown command. If this is the case, use mlaunch kill instead.

For example:

mlaunch --sharded 2 --single --auth --username thomas --password my_s3cr3t_p4ssw0rd

This command would start a sharded cluster with 2 single shards, 1 config server, 1 mongos, and create the user thomas with password my_s3cr3t_p4ssw0rd. It will use the default roles and place the user in the admin database. mlaunch will

--auth-role-docs

Use with --auth-roles to interpret roles specified as JSON documents.

--no-initial-user

Do not create an initial user if auth is enabled.

Optional Parameters#

--port PORT

Uses PORT as the start port number for the first instance, and increases the number by one for each additional instance (mongod/mongos). By default, the start port value is MongoDB’s standard port 27017. Use this parameter to start several setups in parallel on different port ranges.

For example:

mlaunch --replicaset --nodes 3 --port 30000

This command would start a replica set of 3 nodes using ports 30000, 30001 and 30002.

--binarypath PATH

Will set the path where mlaunch looks for the binaries of mongod and mongos to the provided PATH. By default, the $PATH environment variable is used to determine which binary is started. You can use this option to overwrite the default setting. This is useful for example if you compile your own source code and want mlaunch to use the compiled version.

For example:

mlaunch --single --binarypath ./build/bin

This command will look for the mongod binary in ./build/bin/mongod instead of the default location.

TLS/SSL options#

--sslCAFile SSLCAFILE

Certificate Authority file for TLS/SSL.

--sslCRLFile SSLCRLFILE

Certificate Revocation List file for TLS/SSL.

--sslAllowInvalidHostnames

Allow client and server certificates to provide non-matching hostnames.

--sslAllowInvalidCertificates

Allow client or server connections with invalid certificates.

Server TLS/SSL options#

--sslMode {disabled,allowSSL,preferSSL,requireSSL}

Set the TLS/SSL operation mode.

--sslPEMKeyFile SSLPEMKEYFILE

PEM file for TLS/SSL.

--sslPEMKeyPassword SSLPEMKEYPASSWORD

PEM file password.

--sslClusterFile SSLCLUSTERFILE

Key file for internal TLS/SSL authentication.

--sslClusterPassword SSLCLUSTERPASSWORD

Internal authentication key file password.

--sslDisabledProtocols SSLDISABLEDPROTOCOLS

Comma separated list of TLS protocols to disable [TLS1_0,TLS1_1,TLS1_2].

--sslAllowConnectionsWithoutCertificates

Allow client to connect without presenting a certificate.

--sslFIPSMode

Activate FIPS 140-2 mode.

Client TLS/SSL options#

--sslClientCertificate SSLCLIENTCERTIFICATE

Client certificate file for TLS/SSL.

--sslClientPEMKeyFile SSLCLIENTPEMKEYFILE

Client PEM file for TLS/SSL.

--sslClientPEMKeyPassword SSLCLIENTPEMKEYPASSWORD

Client PEM file password.


kill#

The kill command stops some or all running nodes in the current environment, depending on the specified tags, by sending the processes the SIGTERM (15) signal.

If no tags are specified, mlaunch kill will kill all nodes. If one or more tags are specified, mlaunch kill will only kill the nodes that have all of the given tags (set intersection). This works even if there is no admin user with the clusterAdmin role.

Instead of the SIGTERM signal, other signals can be specified with the --signal parameter. (not available on Windows)

Usage#

mlaunch kill [TAG [TAG ...]] [--signal S] [--dir DIR] [--verbose]

Tag Parameters#

The following tags are used with mlaunch, although not all tags are present in every environment:

  • all: all nodes in the environment.

  • running: all currently running nodes.

  • down: all currently down nodes.

  • mongos: all mongos processes carry this tag.

  • mongod: all mongod processes (including arbiters and config servers).

  • config: all config servers

  • shard: this tag is only used to identify a specific shard number (see below).

  • <shard name>: for sharded environments, each member of a shard carries the shard name as a tag, e.g. “shard-a”.

  • primary: all running primary nodes.

  • secondary: all running secondary nodes.

  • arbiter: all arbiters.

  • <port number>: each node carries its port number as a tag.

If a single tag is specified for the kill command, the nodes matching this tag will be killed. If multiple tags are specified, only the nodes matching all tags are killed. Each tag will narrow down the set of matches further.

For example:

mlaunch kill

This command kills all running nodes in the current environment.

For example:

mlaunch kill mongos

This command kills all running mongos processes in the current environment.

For example:

mlaunch kill shard-a secondary

This command kills all running secondary nodes of the shard called ‘shard-a’ in the current environment.

For example:

mlaunch kill config primary

This command would not kill any nodes, because there is no node with both tags config and primary.

For example:

mlaunch kill 27017

This command would kill the node running on port 27017.

In addition, some tags can be combined with a succeeding number. These tags are: mongos, shard, config, secondary.

For example:

mlaunch kill shard 1

This command kills all members of shard 1 in the current _sharded_ environment.

For example:

mlaunch kill shard 2 primary

This command kills the primary of the second shard in the current _sharded_ environment.

For example:

mlaunch kill secondary 1

This command kills the first secondary node of all shards if the environment is _sharded_. If the environment is a _replicaset_, it only applies to the first secondary.

For example:

mlaunch kill

This command sends signal SIGTERM (15) to all running processes in the current environment.

For example:

mlaunch kill --signal SIGUSR1

This command sends signal SIGUSR1 (30) to all running processes in the current environment, which in MongoDB causes a log rotation.


start#

The start command starts some or all nodes that are currently down in the current environment, depending on the specified tags. If no tags are specified, mlaunch start will start all nodes. If one or more tags are specified, mlaunch start will only start the nodes that have all of the given tags (set intersection).

Usage#

mlaunch start [TAG [TAG ...]] [--dir DIR] [--verbose]

Tag Parameters#

The following tags are used with mlaunch, although not all tags are present in every environment:

  • all: all nodes in the environment.

  • running: all currently running nodes.

  • down: all currently down nodes.

  • mongos: all mongos processes carry this tag.

  • mongod: all mongod processes (including arbiters and config servers).

  • config: all config servers

  • shard: this tag is only used to identify a specific shard number (see below).

  • <shard name>: for sharded environments, each member of a shard carries the shard name as a tag, e.g. “shard-a”.

  • arbiter: all arbiters.

  • <port number>: each node carries its port number as a tag.

Different to the stop command, there tags for primary and secondary are not available for the start command. This is because the replica set state of a running node is undetermined.

For examples, see stop.


stop#

The stop command stops some or all running nodes in the current environment, depending on the specified tags, by sending the shutdown command to the mongod or mongos instance.

If no tags are specified, mlaunch stop will stop all nodes. If one or more tags are specified, mlaunch stop will only stop the nodes that have all of the given tags (set intersection).

In authenticated environments, the stop command requires a user in the admin database with the clusterAdmin role. Otherwise the stop command will not succeed. In that case, you can use the kill command instead.

Changed in version 1.2.3

As of version 1.2.3, the stop command is an alias for the kill command.

For examples, see kill.

Usage#

mlaunch stop [TAG [TAG ...]] [--dir DIR] [--verbose]

Tag Parameters#

The tags for the stop command are the same as for kill.


restart#

The restart command stops, then restarts some or all nodes in the current environment, depending on the specified tags. It is added for convenience and behaves like a stop and start command in succession. If no tags are specified, mlaunch restart will restart all nodes. If one or more tags are specified, mlaunch restart will only restart the nodes that have all of the given tags (set intersection).

Usage#

mlaunch restart [TAG [TAG ...]] [--dir DIR] [--verbose]

Tag Parameters#

See start and stop.


list#

The list command shows an overview of all nodes in the current environment, as well as their status (running/down) and port. With the optional --verbose flag, the list command also shows all tags for each node.

Usage#

mlaunch list [-h] [--dir DIR] [--json] [--tags] [--startup] [--verbose]

For example:

mlaunch list

PROCESS          STATUS     PORT

mongos           running    27017
mongos           running    27018

config server    running    27025
config server    running    27026
config server    down       27027

shard01
    primary      running    27019
    secondary    running    27020
    arbiter      running    27021

shard02
    mongod       down       27022
    mongod       down       27023
    mongod       down       27024

This command displays a list of all nodes, their status and port number. In this case, the environment was started with:

mlaunch --sharded 2 --replicaset --nodes 2 --arbiter --config 3 --mongos 2

Optional Parameters#

--json

This option outputs the results in JSON format, which may be useful for integration with other tools or scripts.

--tags

This option additionally shows a column with all the tags that the instance can be addressed with. Tags can be used to target certain instances for start, stop, kill, etc. commands.

For example:

mlaunch list --tags

PROCESS      STATUS     PORT     TAGS

primary      running    27017    27017, all, mongod, primary, running
secondary    running    27018    27018, all, mongod, running, secondary
mongod       down       27019    27019, all, down, mongod

This command displays a list of all nodes, their status and port number, and in addition, their tags. In this case, the environment was started with:

mlaunch --replicaset
--startup

This option additionally shows a column with the startup strings that was used to run the given instance. This is useful to if an instance needs to be started manually.

For example:

mlaunch list --startup

PROCESS      PORT     STATUS     PID     STARTUP COMMAND

secondary    27017    running    4264    mongod --replSet replset --dbpath /tmp/data/replset/rs1/db --logpath /tmp/data/replset/rs1/mongod.log --port 27017 --logappend --fork -vv
mongod       27018    running    4267    mongod --replSet replset --dbpath /tmp/data/replset/rs2/db --logpath /tmp/data/replset/rs2/mongod.log --port 27018 --logappend --fork -vv
mongod       27019    running    4270    mongod --replSet replset --dbpath /tmp/data/replset/rs3/db --logpath /tmp/data/replset/rs3/mongod.log --port 27019 --logappend --fork -vv

This command displays a list of all nodes, their status and port number, and in addition, their startup commands.

Disclaimer#

This software is not supported by MongoDB, Inc. under any of their commercial support subscriptions or otherwise. Any usage of mtools is at your own risk. Bug reports, feature requests and questions can be posted in the Issues section on GitHub.